When the camera or camcorder is taking photos or recording videos, any objects moving relative to the camera will appear blurry or tailing along the relative motion direction. Under the same conditions, the longer the exposure time, the more obvious the image blur.
Motion blur test in GA/T 1127-2013
In the GA/T 1127-2013: General Technical Standards for Security Video Surveillance Cameras formulated by the Ministry of Public Security [Subjective Evaluation of Image Quality], the evaluation method of the five-level damage system is adopted:
Sports scene test method:
Illumination range: 10lux~1000lux adjustable
Diameter: 40cm turntable, rotating at a constant speed of 120rpm
Equipment placement: a motion blur test card with a diameter of 40cm (as shown in the figure below) is placed in the center of the turntable, and the circular black spot on the test card is 5mm in diameter
Motion blur test card
The center of the camera to be tested is in a straight line with the center of the turntable. The test content should fill the entire camera output image. The test camera exposure works in "automatic" mode. During the test, capture the camera output image and ensure that the image is complete (including motion). The trailing part caused by the blur) caught 3 circular black dots on the test card.
Result evaluation: Evaluate the number of pixels of motion blur (smearing) caused by circular black dots, refer to the [Subjective Evaluation of Image Quality] table for scoring.
Grab the camera output picture
An Introduction:
Based on this standard, Zhengyin Technology has developed a camera motion blur test system, which not only meets the rotation speed and pattern design requirements of the rotating disc in the standard, but also the user can choose the evaluation software with the device to automatically identify the number of pixels in the evaluation area in the image. Improve the consistency of the evaluation results.
Camera motion blur test demo video
Device parameters:
Standard configuration: 30/60/120/240 rpm (customizable speed: 30~240)
Standard:40cm
Standard:5mm
Roulette speed
Wheel diameter
Diameter of black spot on roulette
Dimensions
Standard:430*430*1200(L*W*H)
Automatic analysis software
Optional
Control
Standard configuration: touch screen control
Voltage
220V
For more information, please contact: sales@colorspace.com.cn
Contact: sales@colorspace.com.cn
Phone: 15817270587
Tel: 400-886-3881(周一至周五 9:00~18:00)
Email: sales@colorspace.com.cn
Add: South Building #2-1101, Lv Di Qi Hang Office Building, Hou Sha Yu, Shun Yi District, Beijing, China