Lens and Image Sensor Test Equipment

OptiCentric®101 Centration Measurement Instrument

Brand：Trioptics
Model：OptiCentric®101
Product description: The Trioptics OptiCentric® 101 Centration Measurement Instrument is a high precision optical component measuring device for measuring the centre and radial deviation of optical components such as len
INQUIRY

Trioptics OptiCentric®101 Centration Measurement Instrument | Optical Component Test Equipment

Designed and manufactured by TRIOPTICS GmbH, the OptiCentric® 101 has long set the industry standard for centration measurement, lens cementing, and optical assembly. In response to customers’ demands for high precision and accuracy, TRIOPTICS continuously integrates its extensive expertise with cutting-edge technologies to deliver superior performance.

Centration Measurement of Lens Assemblies

The accuracy of the rotating bearing is a key factor in centre deviation measurement. The new OptiCentric® 101 offers positioning accuracy and thus advantages for both the measurement of lenses and lens gluing using multi-lens set software and the SmartAlign module.

Lens gluing

The new OptiCentric® 101 improves the measurement accuracy of single lenses and offers advantages for calibrating lenses

Increased efficiency

The new OptiCentric® 101's measurement pitches move faster, reducing measurement time and increasing efficiency, which is an advantage for batch testing


The effect of vignetting is minimised by moving the self-collimator on the axis.	The self-collimator is fixed on top of the moving axis. This approach will effectively reduce the influence caused by the straightness of the guide rails and help to better determine the azimuth angle, e.g. for the measurement of a cylindrical mirror.

Product type and technical parameters:

Model	OptiCentric® 101
Measurement Modes	Reflection and Transmission Modes
Measured Lens EFL or Radius Range (Standard)	+5...+450mm
Measured Lens EFL or Radius Range (Extended)	±5...±2000mm
Centration Measurement Accuracy	±0.2μm to ±2''
Centration Repeatability	±0.01μm to ±1''
Radius of Curvature Measurement Range	±5...±450mm
Radius of Curvature Measurement Accuracy	0.3%
Radius of Curvature Repeatability	0.2%
Maximum Diameter of Measurable Singlet	200mm
Maximum Diameter of Measurable Lens Assembly	270mm
Maximum Height of Measurable Lens Assembly	200mm
Number of Measurable Surfaces per Lens Assembly	Up to 20 surfaces (typical)